|
GT210-C
This glide has a 1-3/16" steel base with 1"
long 1/4-20
threaded stem for attachment using a nut, threaded adapter or threaded
insert. Threaded stud is molded into steel base with plastic.
Minimum height is 3/8"
Prices limited to stock on hand.
|
|
|
|
GT751-C
This glide has a 2-1/2" long 1/2-13 threaded stem
for attachment
using a nut, threaded adapter or threaded insert. The 1-11/16"
GRAY non-skid base with nickle plated hood has the threaded stud
riveted into the base. The base does not swivel but it does
rotate.
Minimum height is 3/4"
Prices limited to stock on hand.
|
|
|
|
|
GT377
This glide has a 1-15/16" long 5/16-18 threaded
stem with hex molded
black plastic base. For attachment using a nut, threaded adapter or
threaded insert. The glide has a 1-7/16" black plastic base.
Minimum height is 1/2"
Prices limited to stock on hand.
|
|
|
|
GT675
This glide has a 1-3/8" long 3/8-16 threaded stem
with hex molded
black plastic base. For attachment using a nut, threaded adapter or
threaded insert. The glide has a 1" black plastic base.
Minimum height is 1/2"
Prices limited to stock on hand.
|
|
|
|
GN14CNP
Nail in cushion glide made for 1/8" dia. hole. The
base is 15/16"
dia. nickel plated.
Glide has a minimum height of 3/8"
Prices limited to stock on hand.
|
|
|
GG150-C
This glide has a 1-1/2" by 1/2" stem. Designed for
mounting to bed
frames. The base is 2-3/16" wide made of hard plastic with a nickle
plated hood.
Mounting height is 2-1/2"
Prices limited to stock on hand.
|
|
|
|